商务电话:0532-83878507  18660285050(马小姐)   技术支持:13808957418(顾晓奎)
产品目录
 
 产品介绍 > Unipulse(尤尼帕斯)产品系列 > 旧版产品信息F370 图形显示数字测力计

 
  • LCD 彩色液晶显示触摸屏,操作简单、视觉清晰
  • 在屏幕可直接输入传感器技术参数进行免砝码标定,使现场标定、维修更为方便
  • 一键置零功能
  • 标准DIN96 安装尺寸
  • 高速度高/低限比较功能

 

用途:

汽车零部件,电机零部件的压入、加紧、负荷判定。

各种试验机的显示控制器。

信号调节,通用增幅器。

 

特征:

全彩触摸式曲线显示,操作简单。

从峰值保持,采样保持,到曲折点保持共有11种类的保持机能。

2000/秒的高速A/D转换。

溢出上限,上限,OK,下限,低于下限的5个(OC)判定信号

      输出,以上的信号输出可以保存16种。        

接口选择I/F , BCD输出,RS485D/A(±10V, 420mA)

DeviceNet・・・Omron, Allen-Bradley etc.

CC-Link・・・三菱電

 

 

Full Color Touch Screen - Graphic Display – 2000 updates /sec.

The hi-speed F370 is designed to provide efficient production control functions in a wide variety of applications.
The panel mount configuration (DIN 96 size) offers maximum mounting flexibility.

Force, pressure, torque, acceleration, displacement, and flow are just some of the applications that can be
supported with this instrument.

Strain gage sensors can be connected directly to the F370, and there are three (2.5, 5.0, and 10.0 V) selectable
excitation voltages to provide the correct amount of power for the strain gages in your application.

The touch screen graphic display has three separate display screens available to use at any time. A tracking
screen for upper and lower limit comparisons, a peak/valley display to allow for hi-speed response in torque and
impact applications, and a graphic “x-y plotting” screen that shows 200 data points in an analog waveform (the
minimum time for generating 200 data points is 1/10th second).

The full color, wide view, touch screen can have its display adjusted to fit the application and lighting within the area
of operation. Both contrast and backlighting are adjustable through the front panel.

System accuracy (non-linearity) is 1 part in 5000 divisions (0.02% full scale). Calibration is simple, cycle the front
panel into the calibration mode, press ZERO wait a few seconds to establish a zero reference standard, then enter
the millivolt value of the sensor you are calibrating. System dead load (mounting plates, hoppers, etc.) can be
compensated for by a dead load weight entry.

Up to 4 separate calibration values (for four separate sensors) can be stored in the F370.
This means you can have a pre-calibrated spare sensor in stock should your primary sensor be damaged.

A standard serial communication protocol (SIF) is included with each instrument – the F370 can be matched with
UNIPULSE remote displays, and UNIPULSE statistical printers to provide documentation of your application(s). If
more communication capabilities are needed then a series of optional Communication Packages are available.
These include: RS 232, Analog output (0-10V or 4-20mA), DeviceNet (ODVA approved), CC-Link (Mitsubishi),
BCD, and RS485.

 
友情链接:|传感器世界|称重测力专家|阿里巴巴中国站|慧聪网|全球衡器网|
 

电话:0532-83878507,83895350  传真:0532-83867072
地址:青岛市香港西路85号裕源大厦C区903室
商务:马小姐 18660285050,13589286387  邮箱:800@unipulse.net            
技术:顾晓奎 13808957418  邮箱:sales@unipulse.net

  
版权所有:青岛汉威称重测力系统工程有限公司